Bedside Kid Tote Tutorial

Share Button

Bedside Kid Tote Tutorial

This post first appeared on Riley Blake Fabrics

Today I am going to be sharing with you a tutorial for this Bedside Kid Tote. It’s a little bit different than another bedside caddy,  in that it attaches to a pillowcase not the mattress. I thought this one might be easier for little hands to reach into, instead of one much lower on the bed in the box springs. Plus it will fit your bed no matter what the size or height of your mattress. You can always still attach it to the space between the box spring and mattress if you like.

Bedside Kid Tote Tutorial

It has a hook on it, so a kid can pack up their tote and carry it around with them during the day- they can even attach it to other things as they like! (like maybe somewhere in the car???)–   You just leave a “D” ring attached to the pillowcase—- makes for easy on and easy off.

Bedside Kid Tote Tutorial

The D ring is attached to the pillow case with a SAFTEY pin, with emphasis on the safety part… I’d recommend ones that are used for diapers to make sure they won’t un hook and hurt a kid. This tote attaches to my sons bed on one of his “fancy” pillows which is code for “the ones that Mom won’t let him sleep on.”

kid-tote-for-side-of-bed

Want to make one?

Here’s how, you’ll need:

1/2 yard fabric for the lining (I used Fun & Games line by Riley Blake Fabrics)

1 Fat Quarter to fussy cut for the appliqués on the front

1/2 yard canvas

1/4 yard for handle lining

Fusible Fleece

Heat N Bond Lite by Thermoweb

Swivel Hook and D Ring

4” of 1 1/2” wide ribbon

Large Safety Pin

Bedside Kid Tote Tutorial

To begin:

Cut out from the canvas 2 squares that are each 13” x 13”. From the bottom corner of each square cut out a 2” x 2” notch.

Roughly cut out 3 images from the Fun and Games print that you’d like to appliqué. Iron Heat N Bond lite to the back of the 3 images. Peel off the backing and iron onto one of the 13” x 13” pieces of canvas. Straight stitch around the edges of each appliqué piece.

Sew the 2 pieces of canvas right sides together with a 1/2” seam allowance. Sew up the 2 side seams and the bottom seam. Press the seams open.

Bedside Kid Tote Tutorial

 

Pinch the corners of the tote (the notched portion) and sew right sides together with a 1/2” seam allowance.

Set tote outside pieces aside.

Cut 2 pieces of canvas and 2 pieces of handle lining fabric to 3” x 13”.

Sew one piece of canvas to one lining piece along the long side with a 1/2” seam allowance. Press seam towards canvas.

Turn under the remaining 2 long edges of the lining and the canvas 1” and press in place.

Fold the strap in half, wrong sides together and stop stitch along both ends.

Do this twice, so you have 2 handles, one for the tote and one to pin to the pillowcase.

Bedside Kid Tote Tutorial

 

Sew one of the handles to the right side of the back of the sewn tote outside piece, with each handle 3” in from the edge of the fabric.

 

Bedside Kid Tote Tutorial

Bedside Kid Tote Tutorial

 

Feed ribbon through a swivel hook. Pin to the tote in-between the handle pieces and stitch down. Pin so that the top of the swivel is 3/4” lower than the top of the bag- you will have extra ribbon hanging off the edge- that is okay.

To construct the lining, cut out 2 pieces of lining fabric to 13” x 13” .

Cut out the same 2” x 2” notches in the bottom of the lining fabrics.

Cut out 2 pieces of fusible fleece the same size as the lining pieces and apply to the lining.

Construct the tote lining the same way you constructed the tote outside.

Bedside Kid Tote Tutorial

 

With the tote right side out and the lining wrong side out, slip the tote into the lining matching seams and centers. (The tote pieces are right sides together).

Stitch around the top of the tote with a 1/2” seam allowance leaving a 4” opening in the outside of the bag so that you can turn it right side out.

Turn the tote right side out, press well. Top stitch along the top of the tote catching the opening as you sew.

Bedside Kid Tote Tutorial

 

Feed the D ring through your 2nd sewn strap piece. Fold it in half and pin inside the pillowcase.

Just a note: This project would not be recommended for very small children as the D ring could pose a chocking hazard if it came loose. 

I’d also love to connect with you online!

follow-on-pinterest-button

logo_facebook

Follow on Bloglovin

 

Comments

Trackbacks

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>