| |

Simple Fat Quarter Table Runner Tutorial

If you’re looking for a simple sewing project, then you may like this Fat Quarter table runner tutorial. It’s stylish, versatile, and best of all simple to create! 

One of the first projects on this site was this Skinny Simple Table runner tutorial (it’s also been one of our most popular projects). Recently I looked back at the tutorial and realized that the instructions could be freshened up a bit. Today I’m excited to share with you the new and improved tutorial.

How to Make a Table Runner out of Fat Quarters

This tutorial is one of my favorites because it’s so easy to make and it’s easily made using Fat Quarters of fabric. Which makes it perfect for using up some scrap fabrics, or leftovers from a fat quarter pack of fabric.

Fat quarter table runner

I have got a very long kitchen table and frequently have a hard time finding table runners to fit.  Since time is ALWAYS a problem for me (more ideas than time) I thought I’d just make a super simple runner for it using some of my favorite fabrics (that also match my kitchen perfectly!)

Fat quarter table runner

Table Runner Size

This runner is VERY easy, you could definitely do it in an afternoon or two. If you have not quilted before and would like to try it, it’s a very very easy project to start with. There are no corners to match up and the design is very flexible.

Just measure the length of your kitchen table to figure out how many blocks you need,  it can be made to any length.

Fat quarter table runner

Simple Table Runner Supplies

My table runner about 14″ x 108 finished.

Before you start: Decide how long you’d like your table runner to be, then divide that number by 11.  This will tell you how many rectangles you need to create your runner.

You can get 2 rectangles from each of your Fat Quarters. If you want your table runner to be made from 10 rectangles you’ll need to buy 5 fat quarters.

Fabric for Table Runner:

4 to 8 Fat Quarters of Fabric

Backing Fabric:

1 1/2 Yards. You may need more for a really long table runner.

Binding Fabric:

1/2 Yard

Batting:

I like to use 100% cotton batting. You will need about 108″ of batting that is 15″ wide. If you purchase a twin-sized batting pack you can use that, then you will have lots of batting leftover to make another table runner. You can also use it for small quilted projects or pillows.

Notions:

Walking foot for Sewing Machine

Construction Steps

Simple Skinny Fat Quarter Table Runner Tutorial

Melissa Mortenson
If you’re looking for a simple sewing project, then you may like this Fat Quarter table runner tutorial. It’s stylish, versatile, and best of all simple to create! 
5 from 1 vote
Prep Time 1 hour
Active Time 3 hours
Total Time 4 hours

supplies

Fabric for Table Runner:

  • 4 to 8 Fat Quarters of Fabric see notes at bottom

Backing Fabric:

  • 1 ½ Yards You may need more for a really long table runner.

Binding Fabric:

  • ½ Yard

Batting:

  • 1 piece 15" x 108" I like to use 100% cotton batting.

Instructions
 

Construction Steps:

  • Cut your fat quarters into pieces 14″ x 11″. You fat quarters are 18″ x 22″. So just cut it in half (11″) then in half again. If your fat quarter is not a perfect 18" x 22" you can adjust the size to work, just make sure all your pieces are cut the same size.
  • Lay out your rectangles in an arrangement that you like. Then stitch the rectangles together along the 14″ sides. For my layout I stitched them in random order, making sure that no two of the same fabrics are next to each other.
  • Stitch using a ¼″ seam allowance and press the seams to one side.

How to Quilt a Table Runner

  • Cut your backing material to 3″ wider and longer than your top. You will need to cut multiple strips of fabric, then stitch them together to get a piece long enough.
  • Using painter’s tape, tape the backing to the floor. If you have a tile or wood floor, use the grout line in the tile to make sure that you have it taped down straight.
  • Spray the backing with quilt basting spray (have something to catch the overspray otherwise you will have a sticky floor!)
  • Cut your batting to the same size as your backing (or about 1″ smaller). I used quilters dream cotton batting.
  • Lay the batting over the backing, and use your hands to smooth out the batting so that there are no bubbles.
  • Spray the batting with quilters basting spray. Then carefully layout your runner top. Use the lines on your floor to make sure it is straight. Smooth out to remove any wrinkles.
  • Remove the tape and roll up the runner for quilting.
  • For this project, you do need a walking foot. Otherwise, your fabric will bunch up and you will never get it to lay straight.
  • Begin by sewing the seam between the 1st and 2nd blocks. Just sew straight down the center of the seam. Sometimes this is called stitching in the ditch.
  • Attach the seam guide to your walking foot. Position it so that it is ¾″ from the needle to the guide.
  • Sew your next quilting line. Place your seam guide right over the top of the seam you just sewed. This will keep all of your quilting lines ¾″ apart. Keep sewing until you have sewn all the blocks. Roll the runner as you go to keep it out of the way.
  • note: If for some reason your measurement is a bit off and your stitching line does not line up with your next seam, still stitch over the seam. You want to have a stitching line at every seam.

Finishing & Binding:

  • After you are done with all of your stitching, lay your runner down on your table, and using a ruler and a rotary cutter, trim off your batting and backing pieces flush with the top of your runner.
  • Bind the quilt using your preferred method. I like to bind mine by machine.
  • After you have bound your quilt, throw it in the wash and dry it. This will give it a nice soft feel, all of your stitching lines will pucker up a bit, giving the runner some dimension!
    Fat quarter table runner

Notes

Before you start:
Decide how long you’d like your table runner to be, then divide that number by 11. This will tell you how many rectangles you need to create your runner.
My table runner about 14″ x 108 finished.
You can get 2 rectangles from each of your Fat Quarters. If you want your table runner to be made from 10 rectangles you’ll need to buy 5 fat quarters.
PRINT
Love this tutorial? Get the behind the scenes on Instagram

More Simple Sewing Projects:

Hexie Tea Towel Tutorial

Farmhouse Style Hanging Dish Towel Tutorial

How to Make Oilcloth Placemats

Fat quarter table runner

Similar Posts

61 Comments

  1. Oh that is so cute!! And simple to boot!! Sigh…. Another fabulous project to add to the stack. When will I ever find the time!!

    :)Rachel

  2. Thanks for a great tutorial. This came at just the right time. I am getting ready to bind my first quilt and the links where so helpful! Wish me luck 🙂

  3. Love it, it’s great and so simple. Now to go and find some fabric and start on it! Thanks for a great tutorial.

  4. This is so cute. Thanks for the tutorial!

    I would love it if you joined my “Saturday is Crafty Day” party on April 24th! Stop by my blog for details.

  5. That looks fantastic!! I love the fabrics you chose! Great job! I might be able to do this!

  6. What a great idea to get that “perfect” table accessory! I am definitely adding this to my “to make” list!

  7. Thanks again for the great idea! I made one up and varied things a bit. See my blog for photos – sillymamaquilts-sillymama.blogspot. You do wonderful work. I enjoy reading your blog.

  8. It is simply beautiful, especially on your table! Love the fabrics you chose and the straight line quilting.

  9. Hey you baste on your floor too! It’s the only space big enough for me.

    It’s very pretty and reminds me of citrous fruit. I’ll have to give the pattern a go. Thanks for sharing!

  10. Just goes to show that even the easiest patterns can be just the perfect thing. It looks great on your table! Thanks for the tutorial.

  11. I really like this! I think this might a good project for me to try out the walking foot for the first time. I also don’t have a seam guide so I may have to get one! Very inspired!!!

  12. Beautiful!

    I was just curious to know if you made this runner the exact length of the table, or if you had a some extra inches hang over each end. (If so, how much?)

    I have a long table also, and wasn’t sure what was the correct way to use a runner.

    Thank you!

  13. Here’s a version I did after seeing your table runner and loving it. My pieces are different widths, and the width is 13 inches and about 74 inches long from point to point.

  14. I couldn’t wait to “Pin” this. I just did a tablerunner but not like this. I wish I had seen this first.

  15. I loved your table runner so much I picked it for my showcase this week for DIY Weekend on my blog!

    Feel free to link up every Thursday. I’d love to have you and your beautiful projects! – Miranda

  16. Pingback: Pintastic Fridays: Fat Quarter Edition |
  17. Thanks for this easy tutorial. I love this pattern and will be trying this soon. I also cut my finger with my rotary cutter a couple of years ago and have a pretty little scar to show for it 🙂 I feel for you because I know that is some serious pain! Lol

  18. Pingback: 70 Things to Sew for Home (Sewing Ideas) - Believe&Inspire
  19. This looks so fun! We just got a new dining set this weekend, so I think I’m going to pull together some of my most favorite scrap fabrics for this project. I have my vintage singer alls et up for free motion quilting, but have never bothered to practice, so maybe I’ll pull that out. Thanks a lot for sharing!

  20. Can’t wait to get started on this!
    Forgive me (I am new to sewing, this will be my first major project!), do you need to use one continuous length of batting, or can you use multiple smaller lengths?
    I appreciate any advise!
    Thanks! 🙂

  21. Aloha,
    Just found your tutorial and so excited to try this. I don’t sew much our quilt at all. I found my sewing machine has a quilting foot but no walking foot. Would I be able to do this project with a quilting foot instead?

    1. Hi! A quilting foot is a special foot that helps you to sew accurate 1/4″ seams. It won’t work for machine quilting (the part where you sew the batting/top and backing together). You do need a walking foot for that. I use mine for all kinds of projects. They are great for sewing bags as well!

  22. Hello! Thank you for sharing this great tutorial on a table runner. I am encouraged to try.
    Is there a link to your method for binding the table runner? I really need help in that department.

    Again, thanks so much!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.