Guest Tutorial, Anna of Noodlehead!

Share Button

Hi there!!

Meet Anna of Noodlehead! I’m sure alot of you already know her though!! Her blog is fantastic! Wonderful, wonderful projects!  With lots of great sewing TUTORIALS! Please stop over there and tell her “hi” for me!

-now onto the tutorial!

Thank you Melissa for having me over today!  I was so happy she asked me to come visit, and I thought I’d share an idea that’s a little something different than what I usually do. 
We’re at the point where I can keep a candle around and it won’t get eaten or destroyed, and I wanted something to put on my dining room table for Thanksgiving this year. So here’s a fun woodworking project that you could definitely accomplish on your own (or for more fun, make it a project with your hubby)!
 All you need are a few basic tools and a few supplies:
1 2×4 piece of quality lumber (I used oak from my local home improvement store)
power drill
220 grit sand paper
1.5″ spade bit
stain
tea lights
1.  Cut your lumber to the length you desire.  I know a lot of home improvement stores can cut lengths of lumber for no charge, so just ask.  Or you could use your own chop saw or borrow a neighbors.  I cut mine to different lengths because I wanted to make some as gifts.  The long version is 30″ long, medium is 15″, and the single square one is 3.5″ square (yes, I should mention that even though lumber says it’s 4″ wide, it really means that it’s about 3.5″ wide – so just keep that in mind).
2.  Drill tea light holes.  Mark your spade bit depth.  Using a piece of blue painters tape.  Mark on the bit how deep you want the drill bit to go, that way when you’re drilling, you’ll drill until the tape is level with the wood.  This will make all your holes the same depth. 
Mark with a pencil where you want your holes to be.  I actually just ‘eye-balled’ all my markings and went for it, but I think you take the length of the piece and divide it by one more than the # of holes you’d like.  Remember measure twice and drill once!  Now with your spade bit attached to your drill, drill the holes.
3. Lightly sand down any rough areas with 200 grit sand paper and wipe off any sawdust.
4. Stain using manufacturer’s instructions.  I used a Gel Stain and wiped it off fairly quickly so the stain didn’t penetrate the wood too much.  I wanted to be able to see the grain of the wood still.  Let dry, pop in your tea lights, and enjoy!  Don’t worry if the depth of the holes varies a little, I ended up putting a little folded piece of paper underneath some of the tea lights to make them level with the wood, just do what works for you!
That’s all!  I think it would look beautiful with any color tea lights and even the white tea lights for a non-seasonal look.
ps. Just thought I should add to make sure to keep small children away from burning candles and matches and never leave a burning candle unattended, but you already knew that.  :)
*edited to add: Hi, Melissa here! I got a few emails asking about the candles burning down into the wood and posing a possible hazard. I don’t know if this would be a problem, but I would just make sure that you don’t leave the candles unattended and extinguish them before they burn too low, better safe than sorry! 

Comments

  1. says

    I love this idea! I think it would be fun for my boys to do :) they love the drill! I’m going to pass this on to my sis who does a handmade christmas gift exchange with her family!

    Thanks Anna :D

  2. says

    Very lovely! My hubby and I made a bazillion of these about 10 years ago to give as gifts. They went over like hotcakes! Another nice touch is to glue a piece of felt on the bottom (same size as the bottom) – creates a nice “finishing touch” as well as being a scratch-preventer.

    Love your blog! Thanks for all your great ideas, and guest posts :-)

  3. says

    This is a great idea that’s easy too! Is there any issue with the candles burning down low and causing a fire hazard with the surrounding wood holder? I love that it’s modern looking.

  4. says

    great idea, thanks … i’m going to make some for christmas with the tablerunners i’m giving as gifts …

    on the *burning to the wood* thought: i saw on a blog a few days ago (no, can’t remember which one) that if you lined the bottom with foil or added foil to the bottom of the tea light, it will be ok, no burning to the wood …. just a thought!

  5. says

    This is simpler than I thought it would be. I love projects like that. They look impressive but don’t take too much. Nice job Anna. You have an amazing creative brain.

  6. says

    Just thought I would add on the burning wood idea that if you use the tea lights that are in the little plastic containers it probably wouldn’t be a problem with them burning to low and being a fire hazard. I let mine burn down to nothing all the time and they just go out on their own.

  7. Diane Harriman says

    We are having a difficult time finding replacement tealights for our finished product. It seems maybe they have changed the size? Where did you get yours?

Trackbacks

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>