How to Sew a Summer Dress from 2 T-Shirts

Use this simple hack to turn two kids’ t-shirts into a summer dress! You’ll save loads of time and end up with a cute summer t-shirt dress as well!

Today I’m sharing a tutorial teaching you how to make a summer sundress from 2 t-shirts! I picked up the t-shirts at Walmart on clearance, but any t-shirts will do.  Just make sure that they are mostly “straight” and not the fitted variety!

Dress Supplies

• 2 t-shirts, both the same size, if you are not sure of sizes estimate UP
• 2 1/2″ band of fabric (just cut 2 1/2″ off the edge of one of your favorite fabrics so that the piece will be 2 1/2 x 44″)
• 6″ band of fabric
• Ribbon

Instructions

The first thing you need to do is try one of the t-shirts on your model and mark the natural waist. This is usually at the belly button.

Next cut off the bottom (after you take it off your model *wink*)… of  t-shirt #1 just below where you marked the natural waist.

On t-shirt #2, cut off the bottom off, just below the arm holes.

With right sides together- stitch the bottom of t-shirt #1 to the top of t-shirt #2.

Press seam.

On your 2 1/2″ wide strip of fabric, stitch 2 button holes in the center.

Turn under edge of strip 1/4-1/2″ on both sides and press.

Pin strip over seam where t-shirt 1 meets t-shirt 2.  Use the seam as a guide so that you will stitch the waistband on straight.

Beginning at the front and working to the back, topstitch waistband in place. Topstitch the top and bottom of the strip.  At the back, end one side of the strip at the center back, and leave the other strip with a 1″ overhang.

Put a safety pin on your ribbon and string through the waistband so that the 2 ends are coming out of the 2 buttonholes in the front.

To close the back seam, fold under the strip overhang and stitch down. You will stitch through the ribbon (this also keeps the ribbon attached to the dress for safety reasons).

Press waistband well.

At this point I think the dress is a bit too short- but if you want to make a swim cover-up you can skip the next step as the dress is already hemmed (you kept the hem on t-shirt 2).

Optional Skirt Hem Band:

Cut the band the same size as the bottom of the dress, allowing for a seam allowance. Stitch together at short sides. You will have a circle of fabric that you can pin to the bottom of the dress. (it should fit perfectly, no gathering)

Pin this band to the bottom of the dress and stitch in place with 1/2″ seam.

Press seam towards skirt band.

Turn band under 1/2″ and press.

Fold band so that the pressed edge of the band matches the seam between the skirt/band.  Pin in place.

On right side of dress, topstitch band in place.

You’re done!!

I hope that you like the dress!!! Let me know what you think!