How to Hang Outdoor Drapes & DIY Outdoor Curtain Rods
Learn how to hang outdoor curtains under a deck by hacking aluminum fencing into DIY Outdoor Curtain Rods. It’s easier than you think to build your own outdoor curtain rods and will save you so much money. We have had ours up for years now and still love how well they work!


Last week I shared some photos of an outdoor room that I’ve been working on since March. You can see photos of the space under our deck.
Today I wanted to share a few more details about the outdoor living space. I’ll also show you how we hung outdoor curtains under our deck to give us a bit of privacy and block out some of the afternoon sun.
I’ve still got several projects “to do” out there, but it’s a good start, and now that the weather has turned to summer, I should be able to get them done!

I knew I wanted outdoor drapes under the deck. I debated buying the curtains or making them. After much research at my local fabric store and online, I elected to buy curtain panels. I got them at a reasonable price.
Since I could not find outdoor fabric locally at a reasonable price, it ended up being close to a “wash” financially. For this reason, I elected to save time purchase mildew-resistant outdoor curtains instead.
How to Make Outdoor Curtain Rods
I found pre-made outdoor drapes at a reasonable price. However, I could not say the same thing about outdoor drapery rods especially because our deck is 20′ x 16′. That’s a whole lot of drapery rod!

One night, I wandered the aisles at Lowe’s and walked past the chain link fencing aisle; I realized the poles for chain link fencing would make great drapery rods!
- They are made to be outside
- They are inexpensive
- Easy to cut to the right size
I was even more excited when I realized that I could use some of the chain-link fencing materials and hang the curtain rods!

Supplies
- Chain Link Fencing Poles – Measure your space so you know how many to buy
- Hand saw than can cut the rods
- U-shaped brackets (buy in the chain-link aisle) You need one for each end of the rod and one to two for the center of the rods.
- Bolts & nuts that fit in the U shaped bracket
- End Caps for Chain Link Fencing
- Drill
- Mildew resistant or UV protected drapes are made for an outdoor spaces. I used curtains that had grommets.
DIY Outdoor Curtain Rod Instructions
Step One:

I purchased fence poles that I knew would fit my curtains’ rings. Then I had my husband cut them to size.
The poles are meant to lock together with a large side and a tapered side, so make sure that you cut the correct end of the pole, so they will still fit together.

Step Two:
When you have the rod the correct size, feed the drapes onto the rod. Then at the rod center (where you joined the 2 pieces if you needed to do that) and the 2 ends of the rod, attach the U-shaped bracket (it’s sold right next to the fencing, make sure you get the right size).

TIP: something to keep in mind. The curtain rod cannot be flush up against the underside of the deck; otherwise, the drapes will not slide back and forth on the rod easily.
My husband and I sat and argued in Lowe’s for about an hour on how to fix this problem… to save you a potential argument; I’ll tell you what we figured out.
Buy a LONG bolt to go through the U-shaped bracket. Feed the bolt through the bracket, then behind the bracket, attach 3 nuts. This will give you a good buffer between the bracket and the wood.

Step Three:
To finish up. You can add the end caps to the ends of the poles to make them look nicer.
If you live in a windy area like me, you’ll want to attach the drapes to the deck to keep them from blowing away.

I installed a hook to the beams on the deck and then used some hemp grosgrain ribbon to make a tie back. The hemp ribbon is a bit stiffer than normal grosgrain… I also got it in bulk, so if the tie-backs start to look bad, I’ll replace them.
How to Keep Outdoor Curtains From Blowing in the Wind
After a few summers with our drapes blowing away every time we needed to use them, we finally figured out a solution to keep them from blowing. We realized that the drapes needed to be attached to keep them from blowing.
Purchase small clips from IKEA meant to be used for sliding drapery. When the drapes are down, use the small clips to clip the drapes to each other along the sides.
Then clip the curtain closest to the beam to the actual beam. This makes one large curtain that is attached to the side post of the deck.
So when the wind blows, the curtains stayed mostly in place.
We tried using curtain weights, but they did not work. Clipping the curtains to each other worked much better. We keep a small bowl of the clips outside on our coffee table, so they are close by when we need them.
You can also use oversized paper clips. Just make sure you take them inside when you’re done with them.

Final Thoughts & Tips
In the evening, the sun comes in so bright through this side of the patio (it gets right in your eyes!) So far, it’s been great to be able to close the drape and get some shade, so we can still enjoy the patio in the evenings!
I’ve received many questions about the outdoor room. I’m planning an FAQ post on it soon, so if you have questions about the drapes, leave a comment, and I’ll answer them in that post!
More Outdoor DIY Projects:
How to Build an Outdoor Fire Pit
Seating Ideas for an Outdoor Fire Pit


This is such a great idea. We just finished hanging our outdoor drapes this way. We found a slight improvement on the “stack of nuts” idea. We found a single 1 1/2 inch metal tube that is actually a galvanized electrical conduit connector. It comes with two small screws on the side, which we removed. This fit perfectly as a spacer over the lag bolt to give us room to open and close the draperies.
I also picked up 1 inch PVC end caps at Lowes and spray painted them to match with Rustoleum hammered paint. (They were either in plumbing or electric.)
Wish I could post a photo. We love it.
Oh! Great ideas, thanks for sharing!
Love what you have created! Just beautiful! I found your site by searching for a solution to the same problem I’m having, but with both curtains and mosquito netting. I stumbled across this site and thought it had some great ideas/solutions.
http://www.mosquitocurtains.com/1-screen-porch-learn/6-base-screened-porch.html
Shelagh
Thanks for sharing the idea!!
My friend used the curtains with the grommets and turned them upside down. Now you have the holes on the bottom and you could just drape decorative chain through the bottom and stitch them to the corner bottoms of the curtain so they don’t slide out. Or use the curtain clips at the bottom and hang something heavy from those.
Thanks for all the tips
I got great netting ccurtains at Ikea–REAL cheap and100% polyester to resist mildew. $9.99 for two very wide panels (110×98) They also have cabana stripes and plain white curtain panels that are 70% poly 30% cotton– $14.99 for two panels.
My problem is weighting them in the wind.havent found a solution other than large fishing weights. Heavy chain is very expensive.
I will use polyester cording for tie-backs.
Someone’s suggestion was use eye Bolts or hooks to hook chain to at posts. Then you could use lighter weight chain. It should stay taught. Hope that helps.
Some excellent items here and really didn’t have a idea in relation to almost any of this before so with thanks for your perception
Thank you all for the tips on adding weight to your curtains. I have a large Gazebo and I use it year around. It came with mosquito netting, so to keep the rain out I attached extra long shower curtains(found at Walmart)to the inside. I used shower curtain rings and clipped them on the same sliding clips that my netting is clipped to. so when I open the netting they open along with it. The next problem was how to keep the shower curtains from blowing in, you could use snaps, but I used 1/2 brass fasteners(office section at Walmart) and took a steel skewer to make a hole through the trim of the netting and the shower curtain, pushed fastener through and bent back the fasteners. Works great. Hope this helps with anyone who wants to keep the rain out.
Could you post a pic of it?
I used large canvas drop clothes for my curtains and just added the grommets for hanging them. It worked out great and way cheaper than buying curtains.
Someone else told me they did that too! I might try that this year if the ones I have look worn out- so far they have held up pretty good though. Thanks for the tip!
We also used drop cloths with grommets but no longer useable. Mold/Mildew and storm damage. Looking at buying clearance outdoor curtains but am still struggling with the bottoms due to wind the curtains blow like crazy!
This year we bought drapes at IKEA they were not outdoor drapes but the price was SO good that even if they only last 2 or 3 seasons it didn’t hurt to throw them away. I think to get drapes that will last for years you have to spend a lot of $, which I did not want to do. The best way to keep them from blowing is to clip them TO EACH OTHER. I used alligator clips (from the office store) then clipped them to each other (on the sides) then clipped the 1st one to the pole, worked like a charm.
We purchased the Dr queen size flat sheets at Wal-Mart and just cut a slit on each end f the wide seam…$20 for 2 sheets and voila instant outdoor curtains in any color your looking for!
I found extra long (96″) fabric shower curtain liners – so mold/mildew resistant and still machine washable – to use as outdoor curtains
I used drop cloths too. I wash them when needed and rehang them. Just make sure to get the ones that are hemmed on all four sides and washable.
We used electrical conduit for our poles and large eyelets screwed into the posts. We also used wood door knobs ssanded to fit each open end of pipe snuggly to keep the pole in place while still being able to take end off to wash. We did the same thing with smaller eyelets at mid height to tie back the curtains but had to upgrade to a heavier ribbon after a major windstorm. We’re going to go with the chain – like the flexibility. We used off sale curtains and threaded the curtain sleeve right over the conduit instead of grommets – just to save money and time. Looks fab!
My best friend uses electrical conduit too for curtain rods. She uses it inside her house and they look great. I love the idea of the door knobs too! We bought chain to add to the hems of the drapes but haven’t done it yet. We figured out that if we clip the drapes together when they are opened (using metal clothespins ) that they don’t blow around as much.
The doorknobs would not only look good in my area, but would keep wasp from nesting inside the poles! Good thinking!
Just a thought about your weights for the curtains. Maybe marbles in the seams. 🙂
This was a great idea! I needed this before I spent way too much money on outdoor curtain rods. I had a problem with my curtains flying around to. I ended up sewing a length of lightweight chain into the bottom of each one. It is heavy enough to weigh them down, but still flexible so you can gather them and tie them back.
We bought the chain to do it this year and just haven’t gotten around to it! I think it’s a great idea! Thanks for the suggestion!
You can also buy steel “rope” run it through the bottom hem and attach to an eye bolt screwed into your post. I used vinyl coated 1/8th” 50′, about $18 at lowes.
I am not sure what type of lightweight chain you are talking about… we love our outdoor drapes but it is always breezy.. I can’t keep the panels together… or keep them down.. so the chain sounds like a good idea.. is it a home depot thingy??
What weight chain did you use?
I would love for you to link it up to my party that is running now. Any linky goes.
http://bacontimewiththehungryhypo.blogspot.com/2011/06/any-link-goes-party-running-now-summer.html
Come strut your stuff.
Here’s my question-can I move in too! 🙂 That looks awesome! Wish I lived somewhere I could even have an outdoor pool! 🙂
Fishing weights or large washers slipped into hem or stitched onto corners?
i would do fishing weights. they are meant to be submerged in water!
love the drapes and the fencing materials were a fantastic idea!!
Oh and by the way, FANTASTIC idea for rods! Drapery hardware is SOOO expensive.
If you had the draperies professionally made, they should already have some sort of drapery weight in the corners. However, those weights won’t really cut it for outdoor breezes. I like one of the previous suggestions; cafe curtain rings clipped to the bottom (possibly just to the corners?) with a weight rod slipped through and attached to the rings. Good luck!
I’m not sure if this would work, but for my curtains inside, I use small fishing weights hidden in the hem to weigh them down. Maybe you could get heavier ones and slip them in? It may require the self proclaimed seamstress to make little pockets in the hem so they don’t all slide to one side though 😉
Chanel puts chain in their skirt hems to make them drape nicely, so how about sewing in some heavy chain inside the hem?
If it works for Chanel it’s worth a shot! Thanks
I’ve been thinking of adding curtains to our breezeway. You’re so right about the cost! I was thinking of just using muslin and replacing them every year, or as they wore out. Would you mind sharing where you found your’s? I’d love to purchase them if I can!
Blessings–
Dana
I used plain white shower curtains, very easy to keep clean
The little hooks with clips that you use to hang curtains could be used upside down. Just clip them to the bottom of the curtain and then anything with a loop could be hung off the hoop. Think fabric beanbags with ribbon loops or even rocks with little hoops epoxied on.